EM-Test dito ESD Simulator

Brand: 

Category: 

Attachment: 

EM-Test dito ESD Simulator 

Highlights

> Most ergonomic design
> Light weight (940g)
> Interchangeable discharge tips
> Interchangeable R/C networks
> Power booster to perform long duration tests
> Library of standard test routines
> Test voltage measurement and control
> Various test routines for testing and evaluation
> High-sophisticated user guidance by test plans created by esd.control software
> Optional fiber optic link between dito and computer (USB port)

Applications

dito - the ultimate ESD tester
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements.

Standards

Bellcore GR-1089-Core Ford ES-XW7T-1A278-AB
Chrysler PF-9326 Ford ES-XW7T-1A278-AC
DaimlerChrysler PF-10540 Ford WDR 00.00EA
EN 300329 IEC 61000-4-2
EN 300340 IEC 61326
EN 300342-1 ISO 10605
EN 300386 V1.3.2 ITU-T K.20
EN 301489-1 ITU-T K.21
EN 301489-17 ITU-T K.45
EN 301489-24 JASO D001-94
EN 301489-7 Renault 36.00.400/B
EN 55024 Renault 36.00.400/C
EN 61000-4-2 Toyota TSC3500G
Fiat 9.90110 Toyota TSC3590G
Ford EMC-CS-2009.1 Volvo EMC Requirements (1998)

Benefits

dito is best designed for the different requirements for testing ESD. Its powerful battery allows to generate more than 50,000 pulses at 16.5kV. This is enough for more than a full day's job. Its different menues lead the user through standard tests, helps to evaluate the test points and allows to find susceptibility levels.
It is unlike any other ESD generators. Its ergonomic design is recognised to be more user-friendly. There is no part of dito that hides the discharge tip while watching the display or operating the dito. You see where you point the tip no matter how you direct dito to the DUT.
The discharge voltage is measured and recorded. Discharge is stopped automatically when battery voltage becomes low. The user is informed when dito cannot charge properly. All this helps to assure reliable and reproducible tests without any question mark and doubt.
Discharge tips and discharge networks can easily be changed without disassembling the dito; simply remove one and plug-on another tip or module. The discharge modules are automatically recognised and the R/C configuration is shown in the display. You just can't use a wrong discharge network!